Editing A Cue Point; Editing A Cue Label; Editing Cue Point Data - Fostex PD606 Owner's Manual

Editing a cue point

By selecting a desired cue point in the CUE LIST screen, you can edit its label or point
(time data) or delete it.
By highlighting a desired cue point and press the [ENTER/YES] key, the display changes
to show the screen for editing the selected cue point (by default, "Label" flashes on the
screen).

• Editing a cue label

To edit a cue point label, press the [ENTER/YES] key while "Label" flashes.
The first character of the current label flashes, showing that you can now edit it.
Use the [MENU] dial (or alphanumeric keys) to edit the label. After editing the
label, press the [ENTER/YES] key ("Label" starts flashing again).
When using the alphanumeric keys for entering characters, pressing any other
alphanumeric key moves the cursor to the right automatically.
You can move the cursor position using the
key clears the right next character to the cursor position. To delete the whole
label, press the [CLEAR] key repeatedly when the first character flashes.

• Editing cue point data

To edit a cue point data, use the [MENU] dial to select "<Position>" while "Label"
is flashing and press the [ENTER/YES] key.
The subframe value of the current time data flashes, showing that you can now
edit it.
flashing
Select the edit point using the
dial, and confirm the setting by pressing the [ENTER/YES] key (the display re-
turns to the CUE LIST screen).
<Note>:
time data to "00h 00m 00s 00sf".
flashing
Regardless of the cursor position, pressing the [CLEAR] key resets the
Chapter 5: Recording/Playback
[ ] / [
[ ] / [ ] keys, edit the value using the [MENU]
Location Recorder Model PD606
flashing
keys. Pressing the [CLEAR]
]
97
flashing