Sampling Frequency And Bit Length Selection; Tc Recording Mode Setting; Clock Pull Up/Pull Down Setting - Fostex PD606 Owner's Manual

Location recorder
Hide thumbs Also See for PD606:
Table of Contents

Advertisement

Chapter 5: Recording/Playback
<Note>:
When "DIGI" (or "WORD" or "VIDEO") is selected but the unit does not re-
ceive a correct digital (or word or video) signal or does not lock to the reference
signal, "DIGI" (or "WORD" or "VIDEO") quickly flashes. In such a case, check cable
connection, etc.
<Note>:
When the system clock is set to "DIGI" or "WORD", the FS of a file to be
played back must match the FS setting of the unit. Otherwise, you cannot play back
the file. In such a case, make the FS setting of the unit to match the FS of the file.

Sampling frequency and bit length selection [

You can select a sampling frequency and bit length combination.
You can select a sampling frequency and bit length combination also via the "Record FS&Bit"
menu item in the "SYS SETUP" menu of the MENU mode (see page 144 for details).
<Note>:
The sampling frequency of the digital input signal must match the Fs/Bit
setting of the PD606.
<Note>:
If you change the FS/BIT setting during recording, the new setting is not
valid until recording stops.
<Note>:
The relation between the number of recording tracks and the Fs/Bit setting
is shown on page 84.
TC generator mode setting (TC recording mode) [
You can select the recording mode of the LTC generated by the internal TC generator or
external time code.
FREE (Free Run), Rec-R (Rec-Run), 24H-R (24H-Run), EXT (Ext Run)
You can also select the TC recording mode via the "Gen mode" menu item in the "TC SETUP"
menu of the MENU mode (see page 183).
<Note>:
You can set the default LTC start time via the "Default LTC Start" menu item
in the "TC SETUP" menu of the MENU mode (see page 190).

Clock pull up/pull down setting [

You can make the pull up/pull down setting of the sampling clock/internal TC frame rate
when the clock reference is set to "INT".
76
Location Recorder Model PD606
Available FS/BIT options (default: 48/24)
44.1/16, 44.1/24, 48/16, 48/24, 88.2/24, 96/24, 176.4/24, 192/24
Available TC recording mode options (default: Rec-Run)
Available pull up/pull down options (default: 0.0%)
+0.1%, 0.0%, -0.1%
]
]
]

Advertisement

Table of Contents
loading

Table of Contents