Aico Ei205ENA Quick Start Manual

Carbon Monoxide Alarm
Battery Powered
Model Ei205ENA
 Proven Electrochemical sensor
 Tamper Proof battery cover
 Memory feature records if Carbon Monoxide (CO) has been
detected
 Easy to use Test/Hush button
 Pre alarm LED gives early warning of CO
 Advanced suppression and calibration technology
 Low power cell warning
 Loud distinctive alarm sound (85db (A) at 3 metres)
 Power, alarm and fault indicator lights
 Kitemarked to BS EN50291:2001
 5 Year Guarantee

Product Description

The Ei205ENA is a Carbon Monoxide (CO) Alarm that runs on
battery power. It has a sealed in tamper proof batteries
designed to last 5 years (the life of the alarm).
The alarm has a high performance electrochemical sensor to
sense CO presence.
The alarm has an integrated pattress and screws for easy wall or
ceiling mounting.
E & OE Our policy is one of continuous improvement.
We reserve the right to amend designs and specifications without prior notice.
Mile End Business Park, Oswestry, Shropshire SY10 8NN

Operation

 The green light will flash once every 40 seconds to show
power is present.
 The alarm will sound and the red indicator will flash at
different speeds to indicate the presence of various levels of
CO gas (see overleaf).
 The alarm will beep every 40 seconds to indicate the
battery is depleted and the unit needs replacing.
 The alarm will beep and the amber indicator will flash every
40 seconds to indicate a fault on the sensor.
 The 'Test/Hush' button will either silence false alarms (if
briefly pressed) or perform a unit self test (if pressed and
held). Note that the alarm cannot be silenced when sensing a
CO level of 300ppm or above.
 Memory Feature—after the unit as been in alarm, the red
indicator will flash every 40 seconds at a rate indicating the
CO level previously detected.
Tel. 0870 758 4000 Fax. 0870 758 4010 www.aico.co.uk
Ei205ENA DataSht Rev 0 29.03.10