Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Aico Carbon Monoxide Alarms 260 Series
Summary of Contents for Aico Carbon Monoxide Alarms 260 Series
- Page 1 ® Product Guide for Carbon Monoxide Alarms Ahead on Quality Ahead on Quality Ahead on Performance Ahead on Performance Ahead on Features Ahead on Features (68.6) When Lives are at Risk When Lives are at Risk it Pays to Fit the Best it Pays to Fit the Best (L2)
- Page 2 The UK Market Leader The Ei range of Carbon Monoxide alarms from Aico provides high quality, reliable detection of Carbon Monoxide (CO). With over 30 years experience in the fire and gas detection industry our proven high quality design, manufacturing and testing processes have established us as Europe's leading manufacturer of residential smoke, heat and carbon monoxide detection products.
- Page 3 Europe's Leading Manufacturer Service & Availability At Aico we believe the very best alarm technology should be accompanied by the very best support possible. We offer unrivalled product information for specifiers, installers and end users of our products. On the ground we have an experienced regionally based technical sales team, a highly trained customer services department and a responsive sales office.
- Page 4 Calibration - The Answer to Reliable Detection Ei CO alarms made to exceed BS EN 50291: 2001 - Precise and reliable calibration is now even more important The BS EN 50291 British and European Standard for CO Alarms requires a much lower trigger level than the previous BS 7860, which it supersedes.
- Page 5 Electrochemical Cell - Provides effective and responsive, long term detection Carbon Monoxide enters the sensor through a gas diffusion hole. A Graphite filter prevents any external contaminants from entering. A Platinum sensing electrode catalyses the oxidation of the CO. Locating and Positioning CO Alarms Where should CO Alarms be located? BS EN 50292 the code of practice for the selection, installation,...
- Page 6 Innovative Design & Practical Features Complete Visual Information Three separate indicating LED's provide visual information: healthy mains supply, CO level sensed/alarm status, and if a fault is detected during the unit's integral self-test. The alarm LED varies its rate of flash depending upon the CO level sensed - giving further information on any dangerous levels of CO.
-
Page 7: Sensor Replacement
Memory Feature The Test/Hush button provides a quick, easy means of both testing the alarm and controlling any false alarms. Operating the Test button also activates the alarm level memory feature. The last recorded CO level will be shown - through Alarm LED flash rate or digital display (Ei261DENRC only). - Page 8 260 Series - The Specifier’s First Choice Mains Powered Alarms With 10Yr+ Rechargeable Lithium Cells The Ei260 Series of Carbon Monoxide alarms are the highest specification units, designed to meet the most demanding requirements of a domestic installation in terms of reliability, longevity and performance. With sealed-in rechargeable cell back-up, a reliable power supply is virtually assured as casual removal of the battery is not possible.
- Page 9 Interconnect & Remote Control Feature Models Ei261ENRC & Ei261DENRC The Problem Audibility throughout the home is a priority, as a situation could arise where a CO alarm is installed in a downstairs kitchen, which has a fossil fuel burning appliance within it, and the alarm signal may not be heard in the upstairs bedrooms or indeed other rooms.
- Page 10 The Contractor's First Choice Mains Powered & Battery CO Alarms For Owner Occupied Properties BS EN 50291:2001 BS EN 50291:2001 The Ei225 Series of Carbon Monoxide alarms are designed to provide reliable mains powered CO detection. Using the same proven CO sensor as the Ei260 series, the unit is designed with performance in mind.
-
Page 11: Frequently Asked Questions
Manual for Smoke, Heat & CO Alarms Tenant User Cards ● Fire Protection for Electrical ● Installations ● Firecap Frequently Asked Questions Product Information & Technical Guides Contact 0870 758 4000 For your literature requirements or visit our website: www.aico.co.uk... - Page 12 Carbon Monoxide Alarms Aico Ltd , Mile End Business Park, Maesbury Road, Oswestry, Shropshire SY10 8NN Tel: 0870 758 4000 • Fax: 0870 758 4010 • e-mail: enquiries@aico.co.uk • www.aico.co.uk Customer Service Helpline: 0870 758 4000 E & OE As our policy is one of continuous development, we reserve the right to amend designs and specifications without prior notice.
Need help?
Do you have a question about the Carbon Monoxide Alarms 260 Series and is the answer not in the manual?
Questions and answers