Indoor Unit (Idu) - NEC PASOLINK+ Manual

+
PASOLINK 155 MB 1+0/1+1 SYSTEM

5.4 Indoor Unit (IDU)

The IDU consists of six (6) panels that have following functions. (Figure 4-1)
1. ODU INTFC
• Performing the multiplexing/demultiplexing of the transmitting signal, receiving signal, SV and
EOW signal
•
Compensating the signal loss depending on IF cable length
•
Automatic Gain control
2. 32 QAM MODEM / 128 QAM MODEM
•
32/128 QAM (Quadrature Amplitude Modulation), Modulator/Demodulator
•
Compensating quality degradation caused by fading
•
Error correction of burst error using the Reed –Solomon encoding/decoding
•
MLC (Multi Level Code) encoding/decoding. (Only for 32-AM)
•
Data streams conversion depending on the modulation scheme
•
Scrambling/de-scrambling of the data
•
RFCOH multiplexing/demultiplexing
•
Velocity conversion for radio frame
3. 150M INTFC / OPT INTFC / 10/100 BASE-T(X) INTFC (Selectable)
•
STM-1 signal interface (150M INTFC / OPT INTFC)
•
RSOH multiplexing/demultiplexing (150M INTFC / OPT INTFC)
•
Hitless switching of No.1 and No.2 receiving signal (150M INTFC / OPT INTFC)
•
2 ports 10 BASE-T/100 BASE-TX INTFC (Each port traffic is separated) (10/100 Base-
T(X))
•
Transparency for VLAN (IEEE 802.1Q Tagged frame) (10/100 Base-T(X))
4. CTRL
•
Setting of equipment operation
•
Monitoring alarm status of the equipment
•
Performing performance monitoring
•
Providing upper rank NMS interface
•
LCT terminal interface
•
EOW interface
5. WS INTFC (option) (32-QAM option)
•
Interface of 2048/1544 kbps Wayside signal
6. LAN CARD (Option)
•
Ethernet interface (10 Base-T) card with bridge function (exclusive use against WS
interface)
- 12 -
MTD-PL-028/141005