Battery Installation - Power Wheels P5064 Owner's Manual

IMPORTANT! Use only a Power Wheels
rechargeable battery. Use of any other battery will damage
your vehicle. Make sure you charge the battery for at least
18 hours using the enclosed Power Wheels
charger before operating your vehicle for the first time.
Charge the battery for at least 14 hours after each use of
the vehicle. Never charge the battery longer than 30 hours.
Failure to follow these instructions may damage your battery
and will void your warranty.
1
• Grasp the bottom edge of the grill and lift the hood.
• Remove the two screws in the pretend motor.
• Remove the pretend motor.
Battery
2
Battery Retainer
• Push the battery retainer and fit the battery into the pocket.
• Release the battery retainer.
P5064pr-0922

BATTERY INSTALLATION

6 volt lead-acid
®
Super 6 volt
®
Pretend Motor
Motor Harness
3
Connector
Battery Connector
• Plug the battery connector into the motor harness connector.
Push firmly to make sure the connector is inserted properly.
Pretend Motor
4
• Replace the pretend motor.
• Replace the two 1˝ bolts into the pretend motor and tighten.
• Lower the hood and "snap" in place.
19