Cleaning And Maintenance Cleaning And Maintenance; Removing And Re-Seating The Pillows; Jet Removal And Replacement - Cal Spas PATIO Owner's Manual

5. Cleaning and Maintenance 5. Cleaning and Maintenance

5.1 Removing and Re-seating the Pillows

5.1 Removing and Re-seating the Pillows
You can remove the pillows for cleaning
and maintenance quickly and easily. This
method works for all types of pillows.
Grab the lower edge of the pillow with both
hands firmly and pull up. As you do this, the
pillow inserts will pop out of the holes.
Re-seat the pillows by aligning the pillow
inserts with the holes and striking the pillow
hard enough to insert the pegs back into the
holes.

5.2 Jet Removal and Replacement

5.2 Jet Removal and Replacement
Jets can be easily removed for cleaning.
Screw-in jet removal
Grasp the outer rim of the jet and turn it count-
er-clockwise. The jet will unscrew from the fitting
until it is free.
To replace the jet, place it in the fitting and turn
it clockwise until it is snug in place and it can be
rotated freely about half a turn. Do not over-tighten
the jet.
Snap-in SQR jet removal
Grasp the outer rim of the jet and turn it counter-
clockwise until it completely stops. You may feel it
slightly loosen pop out a bit from the fixture. Pull
the jet out from the jet fixture. The jet will be very
snug and may require some force to remove it. DO
NOT PRY OUT JETS.
To replace any jet, place it in the fitting and turn it
clockwise until it snaps in and can be rotated freely
about half a turn. Do not over-tighten the jet.
40