4.0 Appendix B - Troubleshooting - Cardionics PAT Operator's Manual

4.0 Appendix B – Troubleshooting
PROBLEM
Sound is transmitted into areas other
than anatomically correct
No sound is heard
POSSIBLE SOLUTION
If sound is heard in an incorrect area, using
the slide volume controls turn the volume
DOWN on each sound until no sound is heard.
Then increase the sound on the desired area
gradually until the proper sound is heard. Use
Slide bars (Figure 3)
Press the stethoscope head a little harder.
Move the stethoscope by inching it around the
area of the sound.
Turn UP the volume. Use Slide bars (Figure 3)
24