Figure 8 Student Assessment; Figure 9 Test Mode Set Up - Cardionics PAT Operator's Manual

coordinate the tests, lectures and passwords. This feature allows any instructor to give different
tests to different students, if desired. The Administrator can set up each lecture, monitor
passwords and tests. If there is only one instructor, he/she will be the Administrator.
Figure 8 – Setting up a Student Assessment Test
Step 1. Click on Lecture Sequence OR "Enter Test Set up". The below screen (Figure 9) will
then be seen.
Step 2. Setting up the Administrator's password is a one-time routine. In the below dialog box,
under NAME, enter PAT123 and press Enter. Use capital letters as it is case sensitive. In the
dialog box labelled "Password", enter GOPAT and press Enter. Use capital letters as the
password routine is case sensitive. Both the name and password can be changed as shown
below in section 3.4.2.
Figure 9 Test Mode Setup
Step 3. We recommend that you change the Name and Administrative Password so you will be
able to manage the Student Assessment function easily. To change the above Name and
Password, click on "Change Admin Name/Password" (see Figure 9 above). When you click on
the above tab, the below dialog box will be seen.
11