Recording And Playing Back; Recording; Playing Back - Logiblocs Spy Kit Inventors Manual

RECORDING AND PLAYING BACK

As you have seen, using the RECORDER block we can record and playback
messages and sounds. The next section gives you some practice at fixing
the system up to record and playback.

RECORDING

The simplest way to switch the
RECORDER block on and off is by
using the BUTTON block.
Put the blocks together as shown.
Slide the slider switch to Record
Decide what you want to say and then press
and hold the BUTTON and speak clearly
into the MICROPHONE.
Release the BUTTON when you
have finished. During recording the
red light will be on.
If your message is a long one
then you will only be able to record
the first 10 seconds. The light
will go off when you have
reached the end of the recording
time. To start again, just release
and press the BUTTON again.
10
.

PLAYING BACK

Now slide the slider switch to Play
This makes sure that you do not
record over your message by mistake.
Hold the blocks so that the SPEAKER block
is close to your ear and press the BUTTON.
Your message will playback to the end
through the SPEAKER. There is no need
to keep the BUTTON pressed.
.