Hcp 1Dk - Hertz HCP 1DK User Manual

HCP 1DK

MONO D-CLASS AMPLIFIER WITH CROSSOVER
Power Supply
11 ÷ 15 VDC / 3 x 30 A
Power supply voltage / fuse:
Idling current (power ON/OFF):
Consumption @ 2 Ω, 14.4 VDC
(Max Musical Power):
Remote In:
ART: Automatic Remote Turn-On/Off with Speaker-In
Amplifier Stage
Features:
Distorsion - THD (100 Hz @ 4 Ω):
Bandwidth:
S/N Ratio (A weighted @ 1 V):
Damping factor (100 Hz @ 4 Ω):
Pre-In sensitivity:
Speaker-In sensitivity:
Load impedance (MIN):
Output Power (RMS) @ 14.4 VDC, THD 1%:
1 Ch:
1 Ch:
Output Power (RMS) @ 14.4 VDC, THD 10%:
1 Ch:
1 Ch:
CEA 2006-A Ratings:
RMS Power
(4Ω, ≤1 % THD + N, 14.4 V): 600 W x 1 Ch
S/N Ratio (ref. 1 W output): 80 dBA
Inputs / Outputs / Filter
INPUTS:
50 ÷ 250 Hz @ 12 dB/Oct.
Pre out Hi-Pass:
Filters FULL:
50 ÷ 250 Hz @ 24 dB/Oct.
Lo-Pass:
SUBSONIC (on/off):
BOOST 50 Hz (adjust):
PHASE (adjust):
Remote Volume Control (adjust):
2480 W
MAX POWER
1. Compact design built from extruded aluminum heatsink with the top side
0.8 A / 1 mA
ensuring effective transfer of the heat.
45 A
2. Special balanced high-noise rejection input circuitry on the Pre-In or
7 ÷ 15 VDC - 1 mA
Speaker-In inputs.
3. Speaker-In (for OEM head units) and RCA-In (for Aftermarket head units) inputs.
4. Selectable ART, Automatic Remote Turn-On/Off function, automatically turns
on and off the amplifier when the OEM radio turns on and off
(can be enabled/disabled, with only Speaker-In inputs).
5. Power supply featuring multiple winding transformer, Low-ESR 105°C capacitors,
D-Class 2 Ω stable output stage.
6. Pre-outs, also available when using Speaker-In level inputs, equipped with Hi-Pass
0.25 %
filter with adjustable 12 dB/Oct. slope with continuity between 50 and 250 Hz,
10 ÷ 500 Hz
providing the ability to create Front + Sub multi-amplification active systems.
100 dB
7. Adjustable Bass Boost (50 Hz) with continuity between 0 dB and 6 dB, for more
> 100
punch from the subwoofer.
0.2 ÷ 5 VRMS
8. Full-range and Lo-Pass crossover filters with 24 dB/Oct. slope and variable
0.8 ÷ 20 VRMS
frequency (50 Hz - 250 Hz), both selectable, with a greater application versatility
for the design of active systems.
2 Ω
9. SUBSONIC filter (24 dB – 25 Hz), removes very low subsonic frequencies from
music signal to prevent damage to the subwoofer.
10. Continuously adjustable PHASE control (0 to 180°); it optimizes alignment of
600 W x 1 (4 Ω)
woofer bass frequencies with sub ones.
1100 W x 1 (2 Ω)
11. Optional Remote Volume Control (HRC); providing the ability to adjust
subwoofer volume level from the dashboard.
740 W x 1 (4 Ω)
1240 W x 1 (2 Ω)
Configurations
Speaker Output
50÷250
LO-PASS 24 dB
25
PRE IN / SPEAKER IN
SUBSONIC 24 dB
Yes
Size / Weight
25 Hz @ 24 dB/Oct.
(0 ÷ 6) dB
(0 ÷ 180) deg
Max size (mm / in.):
(-50 ÷ 6) dB Weight (kg / lb.):
Elettromedia
- 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it
HRC
OPTIONAL
Pre Output
Hz Hz
FULL
25
Hz Hz
50÷250
SUBSONIC 24 dB +
LOPASS 24 dB
50÷250
Hz
HI PASS 12 dB
315 x 190 x 50 / 12.40 x 7.48 x 1.97
3,0 / 6,61
6