Initial Operation; Setting The Display Language - Kubota U48-4 Operation Instruction Manual

Operation

Initial operation

Before initial operation, the excavator must first be checked visually for external transit damages and checked if
the shipped equipment is complete as ordered.
Check fluid levels as described in the "Maintenance" section (page 126).
!
For a description of all operation features refer to the "Operating the excavator" section (page 64) as well as
!
the following sections.
If defects are detected, please inform your dealer immediately.

Setting the display language

Messages in the display can be shown in 11 languages.
Turn the starter switch to the RUN position.
!
Press button 1.
!
The user menu appears in the display.
Press button 2 or 3 until "Language Selection" is selected in the
!
display.
Press button 5 to confirm.
!
The list of available languages appears in the display.
Press button 2 or 3 until the desired language is selected.
!
Press button 5 to confirm.
!
61