Cleaning And Maintenance - GASLAND chef GH1304SS Installation Instructions Manual

17 21

Cleaning And Maintenance

Stainless steel surfaces
Do not use a steel wool pad; it will scratch the surface.
To clean the stainless steel surface, use warm sudsy water or a stainless steel
cleaner or polish. Always wipe the surface in the direction of the grain. Follow
the cleaner instructions for cleaning the stainless steel surface.
Cleaning Knobs
For easier cleaning, the control knobs may be removed by pulling them directly
upwards once the knobs are in the OFF position. The knobs can be washed by
hand with soap and water or in a dishwasher.
To replace knobs after cleaning, align the hole on the knob backside with the gas
valve shaft and push downward until the knob is securely fastened. All knobs are
interchangeable.
Removal of surface burners for cleaning
Turn all controls OFF. Allow cooktop to cool before removing grates and burner
parts. When removing the burner caps and heads, remember their size and
location. Replace them in the same location after cleaning.
Burner cap
Burner crown
Thermocouple
1 (844) 538-7890
support@gaslandchef.com
Pull the knob straight up off the stem.
Ignition electrode
Fig.29
Locator pins
Thermocouple
Pin indentations
Fig.30
Burner cap
Ignition
electrode
www.gaslandchef.com
3330-A Marathon Ct Charleston, SC 29418