Care And Cleaning; Safety Devices; Proof Of Purchase; Technical Specification - Goldair GHOR100RS Operating Instructions Manual

Outdoor radiant heater
Table of Contents

Advertisement

SAFETY DEVICES

This appliance has one protection device:
• Tilt Switch - this will automatically turn the appliance off if the appliance is not in
the correct operating position.
CAUTION:
The appliance generates heat during use. Precautions must be
taken to prevent the risk of burns, scalds, fires or other damage to persons.

CARE AND CLEANING

The heater requires regular cleaning to ensure trouble free operation:
• Unplug the heater from the mains supply before cleaning.
• Ensure that the heater has been allowed to cool down completely before cleaning.
• The common cause of overheating is deposits of dust or fluff in the appliance.
Ensure these deposits are removed regularly by unplugging the appliance and
vacuum cleaning the air vents and grills.
• Use a damp cloth (not wet) to wipe the exterior of the heater to remove dust and
dirt.
• Never use solutions such as petrol, thinners or polishing agents.
• Ensure the heater is dry before plugging back into the mains supply.
• Do not attempt to dismantle the heater.
• There are no user serviceable parts. For service or repair, contact an authorised
electrical service technician.

PROOF OF PURCHASE

To receive warranty retain receipt as proof of purchase.

TECHNICAL SPECIFICATION

Model No:
GHOR100RS
Supply:
240VAC 50Hz
Wattage:
2400W
Care & Cleaning
Goldair – New Zealand
Monday – Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
info@cdb.co.nz
SUPPORT AND TECHNICAL ADVICE
Monday – Friday 8am-5pm
Phone +61 (0)3 9365 5100
Goldair – Australia
Phone 1300 465 324
info@cdbgoldair.com.au

Advertisement

Table of Contents
loading

Table of Contents