Replacing the Bag
1
Lift up on the canister lid to open.
EN
2
Pull up on the plastic card to remove
the bag from the canister.
Note:
This will
seal the bag so
dust and debris
cannot escape.
10
For more information, visit global.irobot.com
3
Discard the used bag.
4
Install a new bag, sliding the
plastic card into the guide rails.
5
Press down on the lid making
sure it is completely closed.
Note:
To achieve optimal performance
with your robot and automatic dirt
disposal, clean and/or replace your
robot's filter as needed.
Removing Debris from Blower
Cover
Inspect blower cover for any lint or debris
built-up, and wipe with a clean dry cloth
to remove.
Need help?
Do you have a question about the Roomba i7+ and is the answer not in the manual?