Care And Maintenance Instructions; Emptying The Bin; Cleaning The Filter - Robot Roomba i7+ Owner's Manual

Care and Maintenance

Care and Maintenance Instructions

To keep your robot running at peak performance, perform the
procedures on the following pages.
There are additional instructional videos in the iRobot Home App.
If you notice the robot picking up less debris from your floor, empty
the bin, clean the filter and clean the brushes.
Part Care Frequency
Bin Wash bin as needed
Filter Clean once a week (twice
a week if you have a pet).
Do not wash.
Full Bin Sensor Clean every 2 weeks
Front Caster Wheel Clean every 2 weeks
Edge-Sweeping Brush Clean once a month
and Multi-Surface (twice a month if you
Brushes have a pet)
Bags
Blower Cover inside Once every month (remove
canister debris from blower cover)
Sensors and Charging Clean once a month
Contacts
Note: iRobot manufactures various replacement parts and assemblies. If
you think you need a replacement part, please contact iRobot Customer
Care for more information.
* Replacement frequency may vary. Parts should be replaced if visible
wear appears.

Emptying the Bin

1
Press bin release
button to remove bin.
Replacement Frequency*
Every 2 months
2
Open bin door to empty bin.
Every 12 months
Every 12 months
Bags should be replaced
when prompted by the
LED indicator / app
3
Place bin back in the robot.

Cleaning the Filter

1
Remove the bin. Remove the
filter by grasping both ends
and pulling out.
2
Remove debris by
tapping the filter against
your trash container.
3
Reinsert filter with ridged
grips facing out. Place bin
back in the robot.
Important: The robot will not run
if the filter is not installed correctly.
Replace the filter every two months.
Roomba i7+/i8+ Owner's Guide
®
EN
7