Basic Shooting Functions - Sanyo VPC-C40 Instruction Manual

BASIC SHOOTING FUNCTIONS

Using the zoom
Your camera has two zoom functions: optical zoom and digital zoom.
You can specify whether or not the digital zoom is enabled (page 114).
1
Point the camera lens at the subject.
2
Press the zoom switch to compose
the desired image.
[T]: Zoom in on the subject.
[W]: Zoom out.
h When the zoom switch is pressed,
the zoom bar appears on the LCD
monitor.
h When the optical zoom factor is at
maximum, zooming stops
temporarily. When the zoom switch
is pressed toward the [T] side
again, the mode changes to the
digital zoom mode and zooming
continues.
3
Take the picture.
For video clip recording, see page 30.
For still image shooting, see page 32.
35
English