Alarms - APRILIA Tuono V4 1100 2021 Manual

RIDING MODE SETTING SCREEN
From ROAD and RACE modes, a specific screen for setting the parameters of the
riding mode may be accessed by pressing and holding the "RIDING MODE" button
on the right hand handlebar control set.
See the paragraph "a-PRC system" for instructions on modifying parameters.
Press RIDING MODE or MODE SET briefly to exit the setting mode screen.
02_17

Alarms (02_18, 02_19, 02_20, 02_21, 02_22, 02_23, 02_24, 02_25,

02_26, 02_27, 02_28, 02_29)
In the event of a fault, the digital display will show the cause.
Take your vehicle as soon as possible to an Authorised Aprilia Dealer.
SERVICE ALARM
In case of failure found in the instrument panel or in the electronic control unit, the
instrument panel signals the failure by displaying the ALARM SERVICE message and
the red general warning icon comes on.
02_18
If there is an immobilizer failure at ignition, the dashboard requests you to enter a user
code. If the code is entered correctly, the dashboard signals the failure by displaying
the message SERVICE and the red general warning icon turns on.
URGENT SERVICE ALARM
A serious failure is signalled by a fast flashing (two flashes per second) of the general
warning icon and by the message ALARM URGENT SERVICE on the digital display.
Take your vehicle as soon as possible to an Authorised Aprilia Dealer. In these cases,
the control unit activates a safety procedure that limits the vehicle performance so that
the rider is able to reach an Authorised Aprilia Dealer at low speed. Depending on
02_19
the type of failure, performance can be limited in three ways: a) by reducing the max-
33