Table of Contents
Advertisement
When a maintenance interval threshold is exceeded, an icon with a spanner is shown.
Scheduled maintenance operations carried out only by an authorised Aprilia dealer or
workshop can deactivate this indication.
The "spanner" icon flashes for five seconds when the key is turned to "KEY ON" when
there is less than 300 Km (186 mi) remaining before the next scheduled maintenance
interval.
With the key set to "KEY OFF" the general alarm warning light flashes to indicate
activation of the locking system. To reduce battery consumption the light stops flashing
after about 50 hours.
02_13
Alarms (02_14, 02_15, 02_16, 02_17, 02_18, 02_19)
In case of failure, a different icon is displayed according to the cause at the bottom of
the display.
Take your vehicle as soon as possible to an Official Aprilia Dealer.
SERVICE ALARM
In case of failure found in the instrument panel or in the electronic control unit, the
instrument panel signals the failure by displaying the word SERVICE and the red
general warning light comes on.
02_14
If there is an immobilizer failure at ignition, the instrument panel requests you to enter
a user code. If the code is entered correctly, the instrument panel signals the failure
by displaying the word SERVICE and the red general warning light comes on.
URGENT SERVICE ALARM
A serious failure is signalled by a fast flashing (two flashes per second) of the general
warning light and by the URGENT and SERVICE words alternately being shown on
the digital display. Take your vehicle as soon as possible to an Official Aprilia Dealer.
In these cases, the control unit activates a safety procedure that limits the vehicle
performance so that the rider is able to reach an Official Aprilia Dealer at low speed.
02_15
According to the type of failure, performance can be limited in two ways: a) by reducing
25
Advertisement
Table of Contents
