Operation & Use - T-SPA T-900 Owner's Manual

OPERATION & USES
Mixer Knob
1. FILL WATER:
The Foot-spa is provided with a single hot and cold mixing valve located in the
front of your spa. Lift the handle to start the water flow and adjust to the desired
temperature. Let the water fill up the bowl until clean jet body is completely
submerged in water.
CAUTION: DO NOT USE FOAMING, SUDSING, OR MINERAL OIL BASED
ADDITIVES IN THE WATER.
2. START WHIRLPOOL MAGNETIC JET
Press the Jet Button located in the front of your spa. This will start your Whirlpool
Magnetic Jet. To stop the whirlpool function, simply press the Jet Button again.
3. DRAIN FOOT-SPA BOWL
Turn Drain Knob to popup drain plug/stopper.
- If the spa has gravity drain (discharge pump) system: water in bowl will be
empty with duration determined by waste-water plumbing.
- If optional discharge pump system is installed: press Drain/Pump button to
activate discharge pump motor. Average drain time approximately one minute
(depending on plumbing characteristics).
4. MASSAGE CHAIR MANUAL BOOK WILL BE SEND SEPARATELY
Page 17
T-SPA MFG, LLC
10510-10520 Kinghurst St Houston, TX 77099
☏ (888) 508-8772 | ✉ info@tspallc.com
www.tspallc.com
Overflow Knob
Jet Button
Drain/Pump Button
Version: T-900