Preparation - DAITEM 230-21X Installation Manual

2. Preparation

1. Remove the cover.
2. Insert the detector cable
in the cable gland.
3. Insert the cable through
the opening in the base
and screw on the cable
gland.
Guarantee sticker
Remove the pre-cut part
of the sticker and stick it to
the guarantee certificate in
the user manual supplied
with the control panel. If
you are adding the siren to
an existing system, use the
guarantee sticker provided
with this product.
Power supply
• The lithium battery pack is clipped into place (see photo
below).
• An alignment arrow on the lithium battery pack shows
which way to connect it.
When switched on, the detector runs a self-test.
If the self-test is:
• correct, the LED indicator lamp lights up for 2 sec.,
• incorrect, the LED indicator lamp flashes every 5 sec.
Lithium battery
pack release tab
Lithium Alignment arrow
battery pack for connection
Cable
gland
137