Advertisement
18
TOLL FREE:
1-800-798-7395
FM765MC_31_IB_E_100510_paths.indd 18-19
PROBLEM
SUGGESTED ACTION
Reset Motor Thermostat:
1. Push the On/Off pedal once.
2. Unplug the unit.
Vacuum Shut
3. Check the source of the overheating problem (i.e. clogged hose
Off Due to
or filter, full bag). Unclog the hose, change bag and clean the
Overheating
filters if necessary.
(motor protective
4. Wait at least 45 minutes before attempting to reuse the
thermostat
automatically
vacuum. After the unit has cooled down for 45 minutes, plug in
turned off unit)
the vacuum cleaner and step on the On/Off pedal. The vacuum
should start again.
5. If the vacuum still does not start, contact customer service at
1-800-798-7395.
1. Plug in firmly.
2. Reset circuit breaker or replace fuse.
Vacuum Won't
Run
3. Step on On/Off pedal to turn on.
4. Reset motor thermostat.
1. Put in a new HEPA dust bag.
2. Adjust carpet height setting.
3. Remove obstruction from air path.
Vacuum Won't
4. Replace belt if broken.
Pick Up
5. Push telescopic tube and flexible hose in securely.
6. Push floor attachment or accessory in securely.
7. Clean/change filters.
Vacuum Picks Up
Moveable Rugs
1. Adjust carpet height setting.
Or Pushes Too
Hard
1. Replace belt.
Rotating Brush
Does Not Turn
2. Check belt changing instructions.
Air Flow
1. Open the manual suction control on the handle of the flexible
Restricted With
hose.
Attachment,
Sound of Vacuum
2. Remove obstruction in air path.
Changes
Cord Does Not
1. Straighten or un-knot the cord.
Rewind
www.fantom.com
19
10-05-10 10:57 AM
Advertisement
