Replacing The Flat Belt - Fantom FM741HV Instruction Manual

REPLACEMENT INSTRUCTIONS
Caution: Be sure to turn the ON/OFF switch to the"OFF" position and disconnect the
power cord from the wall outlet before replacing any of the parts below.

Replacing the Flat Belt

Remove the bottom plate.
1
(refer to page 14)
Lift out the agitator assembly,and then remove the flat belt from the motor shaft and
2
the agitator pulley.
Place a new flat belt onto the motor shaft and pulley.
3
Place the agitator assembly into the grooves in the nozzle head, making sure that the new
4
flat belt slides securely into the guide.
Bearing Holder
Groove
5 Reattach the bottom plate
(refer to page 14)
Motor Shaft
Flat Belt
Agitator Assembly
Nozzle Head
Motor Shaft
Flat Belt
Flat Belt
Pulley
Caution:
Install the flat belt so that it has no
twists in it,and so that all components
turn smoothly.
13