Connect - UTILITY WAREHOUSE Super router Setup Manual

Connect

Wireless Connections
1. Go to your device settings and make sure your Wi-Fi is turned on.
2. You'll see all available wireless networks. Click on your wireless network
(you can find your network name on the Wireless Settings Card).
3. Enter the wireless key from your Wireless Settings Card when
prompted. Click 'Join' or 'Connect'.
How you connect to the internet varies from device to device. If you're
unsure, please check the manufacturer's instructions.
If you have WPS (Wi-Fi Protected Setup) enabled on your device,
you can connect automatically rather than searching for the
network and typing in the wireless key. Just press the WPS button
on the top of your router and then press the WPS button on your
wireless device to connect to the internet.
Wired Connections
1. Plug one end of the Ethernet cable into one of the yellow ports on the
back of the router.
2. Plug the other end into the port on your computer with this symbol
on a PC or this symbol <...> on a Mac.
That's it - you're ready to go online.
Tip
Your network name and wireless key are also
printed on the back of your router.
08 | Super Router Setup Guide