Install Mounting Pole - Bresser 4Cast PRO Instruction Manual

Wifi weather center with 7in1 outdoor sensor

Hide thumbs Also See for 4Cast PRO:

Table of Contents

Available languages

Step 1: Loosen the screw lightly until the gears on the

opposite side separated from lock position.

Step 2: Adjust the vertical angle of the solar panel (0°,

15°, 30°, 45°, 60°) according to the latitude of your

location.

Step 3: Push the gear and tighten the screw until the

gears are securely locked.

3.1.5 INSTALL MOUNTING POLE

Mounting kit set

1. Pole mounting stand x 1

4. screws x 4

7. screw x 1

2. Mounting clamp x 1

5. Hex nuts x 4

8. Hex nut x 1

3. Plastic pole x 1

6. Flat washers x 4

Table of Contents

Table of Contents

Do you have a question about the 4Cast PRO and is the answer not in the manual?

7003210 7803210 7903210