Installing Fire Cam Opti Mount - Fire Cam OPTIMAX User Manual

Installing Fire Cam Opti Mount

With set screws loose, fit the mount on the front brim of the fire
helmet. Snug the 2 set screws on the brim. Do Not Overtighten.
The camera can be removed by simply sliding it off the mount.
NOTE: Due to the required size of the OptiMax, the housing sticks
out from the front of the brim and will interfere with full face
shields if installed on helmets.
*At least ½ inch of brim is required for mount to install correctly.
Contact Fire Cam Support at 618-416-8390, M-F Central
Time or support@firecam.com
replacement parts.
REMARKS:
THE SPECIFICATION IS SUBJECT TO CHANGE WITHOUT
NOTICE.
for assistance or