Take Still Pictures; Playback On Your Computer - Fire Cam OPTIMAX User Manual

Take Still Pictures

To take still pictures with the OptiMax, make sure that the
Photo/4K/1080P Mode Switch④
Turn on the OptiMax by pressing the Power button ②.
Press the Power/Shutter ② button to start taking photos, the red
LED will blink. Press the Power/Shutter button ② again to stop
taking photos and to go back to the standby mode.
In photo mode the OptiMax will take sequentially photos every 3
seconds. It stops automatically if the battery is empty or if the
micro SD card is full.
*Please note that the camera can be stopped only when red LED
is ON. When green LED is ON, it indicates that the file is being
saved onto the micro SD card and cannot be stopped at this stage.

Playback On Your Computer

Open the Battery
connect with your computer via USB cable from the USB port
⑤. The camera will be recognized automatically as USB Device.
Or you can take out the micro SD card and use your own card
reader to connect with your computer too. Open folders to
access the video files to playback or transfer. Older PC's may
not playback 4k videos correctly. Download VLC Media Player
for smooth playback of your video files.
https://www.videolan.org/vlc/index.html
Cover⑨, Then, power on the OptiMax and
is set to the left for photo mode.