Automatic Closing Of The Osd After Inactivity - G&D VisionXS-IP-F-DP-UHR Additional Instructions For Installation And Operation

Automatic closing of the OSD after inactivity

If desired, you can set the OSD to close automatically after a period of inactivity.
The period of inactivity can be defined by entering a value between
NOTE:
To disable the function, enter the value
How to change the period of inactivity after which the OSD closes:
1. Press
Ctrl+Num
2. Select the row
3. Select the row
4. Select the row
5. Enter the desired time range from
6. Press F2 to save your settings.
1. In the menu, click on
2. Click on the user account you want to configure and then click
on Configuration
3. Click on the tab
4. Under
Timeout OSD session
5. Click on
Save
(default) to open the on-screen display.
Console setup and press
Personal Profile and press
Close OSD when inactive for [s]
Users .
.
KVM extender systems
, enter a time span between
.
.
0
Enter .
Enter .
and press Enter
to seconds and press
5 99
.
and
5
G&D VisionXS-IP-F-DP-UHR · 54
Configuration
and seconds.
5 99
.
.
Enter
seconds.
99