Table of Contents
Advertisement
Available languages
Available languages
Configuration
Enabling or disabling DDC/CI support
The computer and user modules supported by the
ready to support monitors with
After the function has been activated, the DDC/CI information is transparently for-
warded to the monitor in order to support as many monitors as possible. However,
we cannot guarantee the support for all monitors.
How to configure the DDC/CI support of a user module:
1. Press
Ctrl+Num
2. Select the row
3. Under
DDC/CI support
disabled
CPU > monitor
bidirectional
4. Press
F2
to save your settings.
1. In the menu, click on
2. Click on the computer module (CPU) you want to configure and then click
on
Configuration
3. Click on the tab
4. When using a multi-channel device, click on the desired video channel and
then click on
5. Select one of the options given under
Disabled
CPU > monitor
Bidirectional
6. Click on
Save
41 · G&D VisionXS-IP-F-DP-UHR
DDC/CI
functionality.
(default) to open the on-screen display.
Console setup
and press
press
F8
to select on of the following options:
The transmission of DDC/CI signals is disabled (default).
The transmission of DDC/CI signals is carried out
exclusively from the CPU to the monitor
The transmission of DDC/CI signals is carried out by
bidirectionally.
KVM extender
.
.
Video channels
.
Configuration
The transmission of DDC/CI signals is disabled (default).
The transmission of DDC/CI signals is carried out
exclusively from the CPU to the monitor
The transmission of DDC/CI signals is carried out by
bidirectionally.
.
VisionXS-IP-F-DP-UHR
Enter
.
.
:
DDC/CI monitor
system are
Advertisement
Chapters
Table of Contents
