G&D VisionXS-IP-F-DP-UHR Additional Instructions For Installation And Operation page 122

Configuration
1. In the menu, click on
2. Click on the computer module (CPU) you want to configure and then click
on
Configuration
3. Click on the tab
4. Click on the tab
station (on the
Click on the tab
workstation (on the
5. In the Scancode set
ing options:
activates scancode set 2 for PS/2 keyboard inputs
Set 2
activates scancode set 3 for PS/2 keyboard inputs
Set 3
6. Click on Save
7. Turn the KVM extender off and back on again.
After you turn the KVM extender on again, the keyboard is initialised and the
selected scancode set is applied.
45 · G&D VisionXS-IP-F-DP-UHR
KVM extender
.
.
General
CPU if you want to configure the setting of the local work-
module).
CPU
CON if you want to configure the setting of the remote
CON module).
field of the Configuration
.
.
section, select one of the follow-