Operating The On-Screen Display - G&D VisionXS-IP-F-DP-UHR Additional Instructions For Installation And Operation

Configuration

Operating the on-screen display

The on-screen display is operated with the console keyboard. The following table
shows you a list of frequently used keys:
Arrow keys:
Enter:
Esc:
Tab key:
F2:
F8:
Ctrl+F8:
29 · G&D VisionXS-IP-F-DP-UHR
Press the arrow keys
Right ) to move the cursor between the different menu items.
Use this key to confirm inputs of open a submenu.
This key closes the displayed menu and shows the superior
menu.
A message is shown if entries are changed but not saved.
Use this key to move the cursor within the list field from one
menu item to the next (or vice versa).
Press this key to save your settings.
The displayed menu closes after the settings are saved and the
superior menu is displayed again.
Press this key to switch between the different options of a menu
item.
Configuration settings with many options support this hotkey
to open a clearly-arranged list containing all options.
Up and Down (in some menus also Left and