Status Light - SAGEMCOM TalkTalk FAST 5364 Manual

TalkTalk Wi-Fi Hub (Sagemcom FAST 5364)

Status light

Unlike most routers, the TalkTalk Wi-Fi Hub (Sagemcom FAST 5364) only has one status light on
it. It is possible for the user to disable the light altogether via:-
Dashboard > See internet settings > Manage advanced settings > TalkTalk WiFi Hub > Device Info
> Light Control
Its various states are:-
1. Blinking amber – Wi-Fi Hub is starting up.
2. Blinking amber and white – Wi-Fi Hub is connecting to the Internet (trying to connect to
the fibre cabinet or exchange equipment).
3. Solid amber – Wi-Fi Hub is verifying your connection. If you've got Fibre you should wait
a few minutes. If you haven't got Fibre, or the light stays solid amber for more than 15
minutes, please contact us. This would seem to be equivalent to the Internet light being red
on other routers.
4. Solid white – Connected to the Internet OK.
5. Blinking Amber – WPS connection attempt in progress (see
Page 3 of 38
Connecting a device via
Date: 25/06/2018
WPS)