Milnor 36021V5Z Service
  1. Manuals
  2. Brands
  3. Milnor Manuals
  4. Washer
  5. 36021V5Z
  6. Service

Milnor 36021V5Z Service

Hide thumbs Also See for 36021V5Z:
Table of Contents

Advertisement

Quick Links

Published Manual Number/ECN: MAP36VXXEE/2019226A
• Publishing System: TPAS2
• Access date: 06/10/2019
• Document ECNs: Latest
Service
36021V5Z, 36026V5Z,
36021V7Z, 36026V7Z,
42026V6Z, 42030V6Z
Washer-Extractors
PELLERIN MILNOR CORPORATION
POST OFFICE BOX 400, KENNER, LOUISIANA 70063-0400, U.S.A.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 36021V5Z and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Milnor 36021V5Z

Summary of Contents for Milnor 36021V5Z

  • Page 1 Published Manual Number/ECN: MAP36VXXEE/2019226A • Publishing System: TPAS2 • Access date: 06/10/2019 • Document ECNs: Latest Service 36021V5Z, 36026V5Z, 36021V7Z, 36026V7Z, 42026V6Z, 42030V6Z Washer-Extractors PELLERIN MILNOR CORPORATION POST OFFICE BOX 400, KENNER, LOUISIANA 70063-0400, U.S.A.

  • Page 3: Table Of Contents

    Guards & Covers 36021V5Z, 36026V5Z BPWOCM02/2019177A Guards & Covers 36021V7Z, 36026V7Z, 42026V6Z, 42030V6Z BPWOCM01/2019177A About the Forces Transmitted by Milnor® Washer-extractors BIWUUI02/20001108 Installation Tag Guide Lines - 36021 & 36026V5Z, V7Z; 42026 & 42030V6Z BNWOAI01/2018212A Prevent Damage from Chemical Supplies and Chemical...
  • Page 4 Table of Contents, continued MAP36VXXEE/19226A Page Description Document Door Handle and Lock Actuator BIIFBM13/20140327 5. Chemical and Supply Devices Soap Chute BPWOCC01/2019177A Peristaltic Supply Assembly BMP190003/2019184A 5 Compartment Supply BPWOCC02/2019177A 6. Water Piping Assemblies Schematic Symbols Key BMP920008/2000302V Water Schematic BMP190004/2019177A Water Inlet Assemblies BMP190002/2019177A...

  • Page 5: Limited Standard Warranty

    (unless the time period is specifically extended for certain parts pursuant to a specific MILNOR published extended warranty) from our factory with no operating hour limitation. This warranty is contingent upon the equipment being installed, operated and serviced as specified in the operating manual supplied with the equipment, and operated under normal conditions by competent operators.

  • Page 6: How To Get The Necessary Repair Components

    • If the component is an electrical component, give the schematic number if known. • If the component is a motor or an electrical control, give the nameplate data from the used component. To write to the Milnor factory: Pellerin Milnor Corporation Post Office Box 400...

  • Page 7: Trademarks

    BNUUUU02 / 2017285A BNUUUU02 0000158094 A.3 7/13/17 1:53 PM Released Trademarks BNUUUU02.R01 0000158093 A.2 7/13/17 1:11 PM Released These words are trademarks of Pellerin Milnor Corporation and other entities: Table 1 Trademarks AutoSpot™ GreenTurn™ Milnor® PulseFlow® CBW® GreenFlex™ MilMetrix® PurePulse®...

  • Page 8: Safety—Rigid Washer Extractors

    The owner/user must familiarize himself with the contents of all machine instruction manuals. The owner/user should direct any questions about these instructions to a Milnor® dealer or the Milnor® Service department.
  • Page 9 The Safety Guide and other machine manuals must be available at all times to the appropriate personnel. See the machine service manual for safety placard part numbers. Contact the Milnor Parts department for replacement placards or manuals. Maintenance —Ensure the machine is inspected and serviced in accordance with the norms of 1.5.
  • Page 10 Processing can cause solvent-containing goods to give off flammable vapors. • Do not use flammable solvents in processing. • Do not process goods containing flammable substances. Consult with your local fire department/public safety office and all insurance providers. PELLERIN MILNOR CORPORATION...
  • Page 11 This will over-speed the motor and pulleys and can cause them to rip apart, discharging metal fragments at high speed. • Stop the machine immediately if any of these conditions occur: • abnormal whining sound during extract • skidding sound as extract ends • clutches remain engaged or re-engage during extract PELLERIN MILNOR CORPORATION...
  • Page 12 Hazards include but are not limited to panic, burns, poisoning, suffocation, heat prostration, biological contamination, electrocution, and crushing. • Do not enter the cylinder until it has been thoroughly purged, flushed, drained, cooled, and immobilized. — End of BIUUUS27 — PELLERIN MILNOR CORPORATION...

  • Page 13: Guards & Covers 36021V5Z, 36026V5Z

    BPWOCM02 / 2019177A BPWOCM02 0000238963 5/20/19 2:42 PM Released Guards & Covers 1 of 2 36021V5Z, 36026V5Z. BPWOCM02.R01 0000238962 A.2 5/20/19 2:41 PM Released Figure 1. Pellerin Milnor Corporation...
  • Page 14 Released Guards & Covers 2 of 2 36021V5Z, 36026V5Z. Table 1. Parts List— Find the assembly for your machine and the letter shown in the "Item" column. The components for your machine will show this letter or the word "all" in the "Used In" column. The numbers shown in the "Item" column are those shown in the illustrations.

  • Page 15: Guards & Covers 36021V7Z, 36026V7Z, 42026V6Z

    BPWOCM01 / 2019177 BPWOCM01 0000233920 4/25/19 3:59 PM Released Guards & Covers 1 of 2 36021V7Z, 36026V7Z, 42026V6Z, 42030V6Z BPWOCM01.R01 0000233919 A.3 4/25/19 3:59 PM Released Figure 1. Front Covers Pellerin Milnor Corporation...
  • Page 16 BPWOCM01 / 2019177 BPWOCM01 0000233920 4/25/19 3:59 PM Released Guards & Covers 2 of 2 36021V7Z, 36026V7Z, 42026V6Z, 42030V6Z Figure 2. Rear Covers Table 1. Parts List—Guards & Covers Find the assembly for your machine and the letter shown in the "Item" column. The components for your machine will show this letter or the word "all"...
  • Page 17 • the liquor level and chemical conditions in the bath preceding extraction, and • other miscellaneous factors. ® Estimates of the maximum force normally encountered are available for each Milnor model and ® size upon request. Floor or foundation sizes shown on any Milnor...
  • Page 18 All data is subject to change without notice and may have changed since last printed. It is the sole responsibility of every potential owner to obtain written ® confirmation that any data furnished by Milnor applies for the model(s) and serial number(s) of the specific machines.
  • Page 19 Read the manuals before proceeding. This symbol appears on most tags. The machine ships with safety, operator, and routine maintenance guides for customer use. Milnor dealer manuals for installing, commissioning, and servicing the machine are also available from the Milnor Parts department.
  • Page 20 A tag will also appear on the restraint to help identify it. Most, but not all shipping restraints display the color red. Some shipping restraints are also safety stands. Do not discard these. Pellerin Milnor Corporation...
  • Page 21 B2T2003001: Hold the side of the connection stationary with a wrench as you tighten the connection with another wrench. Other- wise, you may twist components, such as valves, damaging them. B2T2004027: Steam connection. (Optional) End of document: BNWOAI01 Pellerin Milnor Corporation...

  • Page 22: Prevent Damage From Chemical Supplies And Chemical

    The company that does these procedures must make sure that these procedures do not cause dam- age. Pellerin Milnor Corporation accepts no responsibility for chemical damage to the ma- chines it makes or to the goods in a machine.
  • Page 23 Figure 1. Incorrect Configurations That Let the Chemical Supply Go In the Machine by a Siphon Schematic Views Legend Pump Chemical tank The siphon occurs above here. Liquid in the gray parts of the chemical tube and tank can go in the machine. Pellerin Milnor Corporation...
  • Page 24 BNUUUR02.R02 0000160545 A.2 A.8 8/30/17 3:28 PM Released Use the chemical manifold supplied. There is a manifold on the machine to attach chemical tubes from a chemical pump system. The manifold has a source of water to flush the chemical supplies with water. Pellerin Milnor Corporation...
  • Page 25 Figure 4. A Configuration that Prevents Flow in the Machine When the Pump is Off (if the chemical tube and tank have no pressure) Schematic View Legend Chemical inlet on the machine Chemical tube Pump Chemical tank Pellerin Milnor Corporation...
  • Page 26 Prevent leaks. When you do maintenance on the chemical pump system: • Use the correct components. • Make sure that all connections are the correct fit. • Make sure that all connections are tight. End of document: BNUUUR02 Pellerin Milnor Corporation...
  • Page 28 BMP020109/2014356B (Sheet 2 of 2) Pellerin Milnor Corporation Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 Parts List—Safety Placard Placement Find the correct assembly first, then find the needed components. The item letters (A, B, C, etc.) assigned to assemblies are referred to in the "Used In"...
  • Page 30 BMP020110/2014356B (Sheet 2 of 2) Pellerin Milnor Corporation Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 Parts List—Safety Placard Placement Find the correct assembly first, then find the needed components. The item letters (A, B, C, etc.) assigned to assemblies are referred to in the "Used In"...
  • Page 32 BMP020111/20143 (Sheet 2 of 2) Pellerin Milnor Corporation Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 Parts List—Safety Placard Placement Find the correct assembly first, then find the needed components. The item letters (A, B, C, etc.) assigned to assemblies are referred to in the "Used In"...
  • Page 34 BMP020112/20143 (Sheet 2 of 2) Pellerin Milnor Corporation Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 Parts List—Safety Placard Placement Find the correct assembly first, then find the needed components. The item letters (A, B, C, etc.) assigned to assemblies are referred to in the "Used In"...

  • Page 35: Service And Maintenance

    Service and Maintenance...

  • Page 36: Torque Requirements For Fasteners

    These tables give the standard dimension, grade, threadlocker, and torque requirements for ® fasteners frequently used on Milnor equipment. ® Note 1: Data from the Pellerin Milnor Corporation “Bolt Torque Specification” (bolt_torque_milnor.xls/2002096). Fasteners Made of Carbon Steel 1.1. Without a Threadlocker 1.1.1.
  • Page 37 Table 3: Torque Values for Plated Fasteners with Maximum 5/16-inch Diameters and No Lubricant The Grade of the Bolt Grade 2 Grade 5 Grade 8 Grade BC Dimension Pound-Inches Pound-Inches Pound-Inches Pound-Inches 1/4 x 20 1/4 x 28 5/16 x 18 5/16 x 24 PELLERIN MILNOR CORPORATION...
  • Page 38 Specific applications sometime require that a LocTite product is applied to a bolt size outside the ranges shown here. For example, Milnor specifies LocTite 242 for use on certain 1" bolt applications and has confirmed this usage with the LocTite manufacturer. You may see variances such as this in the documentation for specific machine assemblies.
  • Page 39 Table 8: Torque Values if You Apply LocTite 262 The Grade of the Bolt Grade 2 Grade 5 Grade 8 Grade BC Dimension Pound-feet Pound-feet Pound-feet Pound-feet 3/4 x 10 3/4 x 16 7/8 x 9 7/8 x 14 PELLERIN MILNOR CORPORATION...
  • Page 40 1.2. Table 11: Torque Values for Stainless Steel Fasteners 5/16-inch and Smaller 18-8 Stainless with 316 Stainless 18-8 Stainless Loctite 767 Pound-Inc Pound-Inc Pound-Inc Dimension 1/4 x 20 1/4 x 28 5/16 x 18 5/16 x 24 PELLERIN MILNOR CORPORATION...
  • Page 41 CAUTION 3 : Malfunction Hazard—Heat, vibration, or mechanical shocks can let the fasteners loosen if you do not apply the threadlocker correctly. Loose fasteners can cause malfunctions of the equipment. • Read the threadlocker manufacturer's instructions and warnings. Obey these instructions. PELLERIN MILNOR CORPORATION...
  • Page 42 No threadlocker here Apply the threadlocker to this area Nut depth Disassembly —For high-strength threadlocker, apply heat for five minutes. Disassemble with 3.3. hand tools while the parts are hot. For low-strength and moderate-strength threadlocker, disassemble with hand tools. PELLERIN MILNOR CORPORATION...
  • Page 43 Torque Requirements for Fasteners Figure 4: Disassembly Apply Heat to a Small Area Legend How to apply heat to a small fastener How to apply heat to a large fastener — End of BIUUUM04 — PELLERIN MILNOR CORPORATION...

  • Page 45: Drive Assemblies

    Drive Assemblies...

  • Page 49: Motor Mount

    30015, 30022, 36021, 36026, 42026, & 42030Vxx,Txx (1 spring on pulley end) Detail A Hardware for all models; 30015V7J/Z, 30022V6J/Z Spring (2 springs) 15,16 (1 spring on pulley end) 36021V5J/Z, 36026V5J/Z Spring 42030V6J/Z Springs PELLERIN MILNOR CORPORATION PELLERIN MILNOR CORPORATION...
  • Page 50 (4 places) 36026V7J/Z & 42026V6J/Z Spring 42030V6J/Z only 8,9,10 4 places 2 places 4 places (1 spring on pulley end) (2 Places) All models 30015 & 30022T5E,T5X Motor Mount and Spring PELLERIN MILNOR CORPORATION PELLERIN MILNOR CORPORATION...
  • Page 51 TUBE=MOTOR MOUNT SPRING ADJ 02 03839B PLATE=MTR MNT REINFORCEMENT 02 04256A DOUBLER=MOTOR CDEF 15K153H INDHEXFLGSCR1/2-13X1+1/4GR8ZN W/LOCTITE CDEF 15G222B HEXFLGNUT 1/2-13 ZINC SERRATED CDEF 15U280 FL+WASHER(USS STD)1/2 ZNC PL+ 02 02822C SPACER=MOTOR MT 36V5 4230V6J/Z ONLY PELLERIN MILNOR CORPORATION PELLERIN MILNOR CORPORATION...

  • Page 53: Bearing Assemblies

    Bearing Assemblies...
  • Page 59 View of Shell Clamp Ring C—C. View of Cylinder to Shaft Connection D—D. Inside View of Front Bearing and Hardware E—E. View of Rear Bearing Installed, Shim, Spider, and Hardware F... 12 instances G... 8 instances H... Shellfront J... Cylinder Pellerin Milnor Corporation...
  • Page 60 GCA119002 CYL INSTL 4226QU 42026V6Z GCA12200 CYL INSTL 4230V 42030V6Z GSF14808D FRONT+SHELL+BASE 3621V7 MK2 36021V7Z GSF14802D FRONT+SHELL+BASE 36V7 MK2 36026V7Z GSF119005 FRONT+SHELL+BASE 4226V LARGE DOOR 42026V6Z GSF12002 4230V6 FRONT+SHELL+BASE LARGE DOOR 42030V6Z Components ABM14801 MAINBRG ASSY 3621/26RWP/E Pellerin Milnor Corporation...
  • Page 61 Y2 12053 *SHELLCLAMP RING=42" MACHINE 02 02087B EXTRUSION-SHELL=42"OEW (12.5 02 02181 GUARD=SHELL MOUNT RING CLIP 15N146 RDMACHSCR 10-24UNC2X1 SS18-8 15G130 HEXMACHSCRNUT 10-24UNC2 SS18-8 15K046S HEXCAPSCR 1/4-20UNC2A X 2.25 S 15G170 HEXNUT 1/4-20UNC2 SS18-8 End of document: BPWOCB02 Pellerin Milnor Corporation...

  • Page 62: 42030V6Z

    Remove at Installation L... 8 Instances M... Use Grade “A” Locktite between shaft and sleeve. Remove all excessive Locktite after sleeve has been pressed on and before installing shaft. Check seal surfaces for traces of Locktite before installing. Pellerin Milnor Corporation...

  • Page 63: 42030V6Z

    BPWOCB01 / 2019177A BPWOCB01 0000235282 5/15/19 2:17 PM Released Bearing Assembly 2 of 3 36021V7Z, 36026V7Z, 42026V6Z, 42030V6Z Figure 2. Bearing Ports and View Reference Legend C—C. Section View, Inlet for Flushing D-D. Section View, Front Seal Leak-off E—E. View of Front Bearing Table 1.

  • Page 64: 42030V6Z

    BODYMALCON1/4X1/8COMP #B68A-4A 53A501 TUBE INSERT .163"OD #63PT-4-40 53A500 SLEEVE DELRIN 1/4"OD#60PT-4 53A059A NUT 1/4"BR.HOLYOKE AND #61A-4 60E004TC TUBING NYL(NAT)1/4"ODX.17ID 53A031B BODY-EL90MALE.25X1/8 #269C-42B 01 10025Z NPLT:BEARING LUB-42"& 36" 5SB0E0CBEO NPTHEXBUSH 1/4X1/8 BRASS 125# 54M020 GREASEFIT 30DEG 1611-B ALEMITE Pellerin Milnor Corporation...

  • Page 65: Inch Door Assemblies After 8/2016

    20 Inch Door Assemblies after 8/2016...

  • Page 66: Flat Front Door

    For the 18 inch door used prior to August 2016, see BMP110053. (3 places) 5,6,7,9 (7 places) (4 places) 2 (See BMP130002.) 15,16 5,6,7,9 Add or remove shims to the upper and lower hinges until the door locks properly and seals. 5,6,7,9 15,16 PELLERIN MILNOR CORPORATION PELLERIN MILNOR CORPORATION...
  • Page 67 Door Assembly: Door Glass Installation Install the gasket into the door before installing the glass. Observe the location of the rubber seal joint line and adjust if necessary. Door Assembly 17,18 Section C-C: Section D-D: PELLERIN MILNOR CORPORATION PELLERIN MILNOR CORPORATION...
  • Page 68 ASD119004 ASSY DOOR=20" FLAT FRONT DOOR ASSEMBLY -------------------------------------------------------------------COMPONENTS------------------------------------------------------------------ 02 11992 20" DOOR FRAME FLATFRONT MACHINED 98CMCR0971 DOOR INTERLOCK ASSY V8Z VRJ MILNOR ASSY A33 03226B 02 11996 DOOR LOCK BOX COVER 20" DOOR 15K017 BUTSOKCAPSCR 10-24X1/2 SS 15K052 HXCAPSCR 5/16-18UNC2AX3/4 SS18 24G027N ROLLED WASH.312ID NYLTITE 31W...

  • Page 69: Door Lock Mechanism

    BMP130002/2016434A Page (1 / 3) Door Lock Mechanism MCR27E5, MWR27E5; 3015T6X,VRJ,V8Z,VZZ; 30022T6X,VRJ,V8Z,VZZ; MWF27J8, MWF27Z8; 30022X8R 36021V5Z, 36021V7Z, 36026V5Z, 36026V7Z, 42026V6Z, 42030V6Z Figure 1: Components DOOR LOCK SOLENOID DOOR LOCK SWITCH DETAILS A & B DETAIL C DOOR CLOSED SWITCH PELLERIN MILNOR CORPORATION...
  • Page 70 BMP130002/2016434A Page (2 / 3) Door Lock Mechanism MCR27E5, MWR27E5; 3015T6X,VRJ,V8Z; 30022T6X,VRJ,V8Z; MWF27J8, MWF27Z8; 30022X8R 36021V5Z, 36021V7Z, 36026V5Z, 36026V7Z, 42026V6Z, 42030V6Z Figure 2: Slider and Settings INSERT ITEM 2. INSERT ITEM ADJUST THE 2. ADJUST THE SWITCH TO BE SWITCH TO BE “OFF”.
  • Page 71 "Used In" column to identify which components belong to an assembly. The item numbers (1, 2, 3, etc.) assigned to components relate the parts list to the illustration. Item Description Used In Part Number Comments --------------------------------------------------------------------------------------------------COMPONENTS------------------------------------------------------------------------------- 98CMCR0971 DOOR INTERLOCK ASSY V8Z VRJ MILNOR ASSY A33 03226B X2 03306A MACH=GAGE DR LOCK SWITH,MCR PELLERIN MILNOR CORPORATION...

  • Page 72: Door Handle And Lock Actuator

    Legend Detailed view CC. Cross Section Detailed view instances 4 Torsion spring Flange bearing Bolt Thrust washer Retainer ring Do not open the ring more than necessary to get it on the shaft. Spring Roller ball Retainer PELLERIN MILNOR CORPORATION...
  • Page 73 Tighten the nut. Put the free end of the spring into this hole. The shim with the added notch Rear view Inside view Detailed view Torsion spring The shim thickness is (.230 inches). The shim thickness is (.015 inches). PELLERIN MILNOR CORPORATION...
  • Page 74 "all" in the "Used In" column. The numbers shown in the "Item" column are those shown in the illustrations. Used In Item Part Number Description/Nomenclature Comments Components 98CMCR0925 Assembly 20C007 Adhesive 02 04192 Shim, .023 02 04192A Shim, .015 — End of BIIFBM13 — PELLERIN MILNOR CORPORATION...

  • Page 75: 71 5. Chemical And Supply Devices

    Chemical and Supply Devices...

  • Page 76: Soap Chute

    5/16/19 9:10 AM Released Soap Chute 1 of 1 36021V5Z, 36026V5Z, 36021V7Z, 36026V7Z, 42026V6Z,42030V6Z Soap Chute BPWOCC01.R01 0000236462 A.2 A.6 5/16/19 9:10 AM Released Table 1. Parts List—Soap Chute Find the assembly for your machine and the letter shown in the "Item" column. The components for your machine will show this letter or the word "all"...

  • Page 77: Peristaltic Supply Assembly

    BMP190003/2019184A Page (1 / 3) Peristaltic Supply Assembly 36021V5Z, 36026V5Z, 36021V7Z, 36026V7Z, 42026V6Z, 42030V6Z (36021V5Z Shown) PELLERIN MILNOR CORPORATION PELLERIN MILNOR CORPORATION...
  • Page 78 BMP190003/2019184A Page (2 / 3) Peristaltic Supply Assembly 36021V5Z, 36026V5Z, 36021V7Z, 36026V7Z, 42026V6Z, 42030V6Z 14,15,16,17,18 22,23 PELLERIN MILNOR CORPORATION PELLERIN MILNOR CORPORATION...
  • Page 79 Page (3 / 3) Peristaltic Supply Assembly 36021V5Z, 36026V5Z, 36021V7Z, 36026V7Z, 42026V6Z, 42030V6Z Parts List Find the correct assembly first, then find the needed components. The item letters (A, B, C, etc.) assigned to assemblies are referred to in the "Used In"...

  • Page 80: Compartment Supply

    Replace this text with applicable model numbers or delete this element. 5 Compartment Supply BPWOCC02.R01 0000236695 A.2 5/17/19 2:08 PM Released Figure 1. Supply Chute Legend A... 4 Instances B... Hot water for supply. See Water Schematic. Pellerin Milnor Corporation...
  • Page 81 BPWOCC02 / 2019177A BPWOCC02 0000236696 5/17/19 2:08 PM Released 5 Compartment Supply 2 of 3 Replace this text with applicable model numbers or delete this element. Figure 2. Valve Manifold Legend C... 2 Instances D... 4 Instances E... 5 Instances Table 1.
  • Page 82 REAR PL.-SUPPLY VALVE HSNG 51X017 UNIONSTRADT 1/2"#1404-8-8 5SR0P0KNF NPT RED 3/4X1/2 GALMAL 150# 53A060H KNURLHOSENUT 3/4"PW#94GH-12 53A060HA WASHER=HOSE #901GH-12 02 03732Z ADAPTER HOSETHD 3/4"X1/4 NPT 53A026A HEXPIPNIP.25X.25 AND#122A-B 15P100 #8 X 3/8 PHILPANHD TYPE B SMS 15U135 FLATWASH#10 .4370DX.203IDX.04T Pellerin Milnor Corporation...

  • Page 83: Water Piping Assemblies

    Water Piping Assemblies...

  • Page 85: Water Schematic

    Water Schematic BMP190004/2019177A (1 / 2) 36021V5Z, 36026V5Z, 36021V7Z, 36026V7Z, 42026V6Z, 42030V6Z Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 FLUSHING WATER PRESSURE RELIEF VALVE PRESSURE PRESSURE GAGE REGULATOR OPTIONAL SUPPLY INJECTOR OVERFLOW PERISTALTIC SUPPLY SEE BMP190003.
  • Page 86 BMP190004/2019177A (2 / 2) Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 Parts List—Water Schematic Find the correct assembly first, then find the needed components. The item letters (A, B, C, etc.) assigned to assemblies are referred to in the "Used In"...

  • Page 87: Water Inlet Assemblies

    Water Inlet Assemblies BMP190002/2019177A 36021V5Z, 36026V5Z, 36021V7Z, 36026V7Z, 42026V6Z, 42030V6Z (1 / 4) Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 For Peristaltic Inlet Assembly, see BMP000043. 36021V_, 36026V_...
  • Page 88 Water Inlet Assemblies BMP190002/2019177A 36021V5Z, 36026V5Z, 36021V7Z, 36026V7Z, 42026V6Z, 42030V6Z (2 / 4) Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 For Peristaltic Inlet Assembly, see BMP000043. 42026V_, 42030V_...
  • Page 89 Water Inlet Assemblies BMP190002/2019177A 36021V5Z, 36026V5Z, 36021V7Z, 36026V7Z, 42026V6Z, 42030V6Z (3 / 4) Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 36021V_, 36026V_ 42026V_, 42030V_...
  • Page 90 BMP190002/2019177A (4 / 4) Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 Parts List—Water Inlet Assemblies Find the correct assembly first, then find the needed components. The item letters (A, B, C, etc.) assigned to assemblies are referred to in the "Used In"...

  • Page 91: Steam Inlet

    Steam Inlet BMP190005/2019177A (1 / 2) 36021V5Z, 36026V5Z, 36021V7Z, 36026V7Z, 42026V6Z, 42030V6Z Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400...
  • Page 92 BMP190005/2019177A (2 / 2) Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 Parts List—Steam Inlet Find the correct assembly first, then find the needed components. The item letters (A, B, C, etc.) assigned to assemblies are referred to in the "Used In"...

  • Page 93: Drain Valve

    Drain Valve BMP190005/2019177A (1 / 2) 36021V5Z, 36026V5Z, 36021V7Z, 36026V7Z, 42026V6Z, 42030V6Z Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 9,10 9,11 (36V7,42V6) 12,13 (36V5)
  • Page 94 BMP190005/2019177A (2 / 2) Pellerin Milnor Corporation Litho in U.S.A. P. O. Box 400, Kenner, LA 70063-0400 Parts List—Drain Valve Find the correct assembly first, then find the needed components. The item letters (A, B, C, etc.) assigned to assemblies are referred to in the "Used In"...

  • Page 95: Inch Electric Drain Valve

    DRINVAL 3"N/O MTRDR240V 50/60C 96D350B71 DRINVAL 3"N/C MTRDR240V 50/60 ----------------------------------------------------------------------------COMPONENTS------------------------------------------------------------- 96D35MTR37 120V 50/60CMTR FOR 3"DRAINVAL 96D35MTR71 240V 50/60CMTR FOR 3"DRAINVAL 96D35B0D B0DY & BALL FOR 3" DRAIN VALVE 96D35C0V MTRCOVER 2-PCFOR 3"DRAINVAL 96D35PIN DRIVE PIN KIT FOR 3" DRAIN VAL PELLERIN MILNOR CORPORATION...

  • Page 97: Control And Sensing Assemblies

    Control and Sensing Assemblies...

  • Page 98: Vibration Safety Switch Adjustments

    Ê A djustments ® When the machine leaves Milnor , the actuator arm is tie-wrapped to prevent damage (except on 30015, 30020, and 30022 models). This tie wrap must be removed after the machine is set into position but before the machine is op- erated.
  • Page 99 that it has reset. In the released position the arm should rest lightly but definitely against the stop on the micro-switch case that prevents any further arm movement to the left. For machines with rigid mounted shells, where the machine is bolted to a very substantial foundation, very little machine movement will occur for a given degree of out-of-balance.

  • Page 101: Temperature Probe

    BMP180074/2018484A Page (1 / 1) Temperature Probe 36021V5Z,V7Z 36026V5Z,V7Z 42026V6Z 42030V6Z Parts List Find the correct assembly first, then find the needed components. The item letters (A, B, C, etc.) assigned to assemblies are referred to in the "Used In" column to identify which components belong to an assembly. The item numbers (1, 2, 3, etc.) assigned to components relate the parts list to the illustration.

  • Page 102: Level Sensing

    BMP180079/2018484A Page (1 / 2) Level Sensing 36021V5Z, 36026V5Z/V7Z 42026V6Z,V6Z To Transducer Transducer PELLERIN MILNOR CORPORATION PELLERIN MILNOR CORPORATION...
  • Page 103 BMP180079/2018484A Page (2 / 2) Level Sensing 36021V5Z, 36026V5Z/V7Z 42026V6Z,V6Z Parts List Find the correct assembly first, then find the needed components. The item letters (A, B, C, etc.) assigned to assemblies are referred to in the "Used In" column to identify which components belong to an assembly. The item numbers (1, 2, 3, etc.) assigned to components relate the parts list to the illustration.

This manual is also suitable for:

36026v5z36021v7z36026v7z42030v6z42026v6z

Table of Contents

Save PDF