Hand-Held Operation; Operation Notes - Kaiser Baas R1 User Manual

HAND-HELD OPERATION

1. Press the Power button to turn the unit on. You will hear a start up tone, the LED
light will turn red and the Car Camera will enter the Camcorder mode. The
will appear in the display.
2. To zoom in, press the 3 button. To zoom out, press the 4 button.
3. To start recording, press the • /OK button; the red Record icon "•" will blink in the
display.
The unit's recordings will be separated into segments depending on the time set,
read page 21 for instructions.
4. Press the • /OK button again to stop recording.
5. You can take pictures by pressing the Mode button once while in the Stop mode;
the icon will appear in the display. Then press the • /OK button to take a picture.
6. Press the Power button again to turn the unit off.
14

OPERATION NOTES

• When the Micro SD card reaches capacity, it will automatically start to rerecord over
icon the oldest footage, therefore saving the latest footage.
• To view the videos/pictures, see page 20
• See page 18 to change menu options
• Auto-Rotate: The display's picture will automatically rotate when the unit is flipped
around
• The time and date will appear on each recording or photo
• When the battery charge runs low, the battery indicator will show no bars. It is time
to charge the battery
• This unit has infrared LEDs that will improve the visibility of night time recordings
automatically
1 5
15