Connecting To A Computer; Connecting To A Tv - Kaiser Baas R1 User Manual

CONNECTING TO A COMPUTER

1. Plug the smaller end of the supplied
USB cable into the USB jack on the Car
Camera and the other end to the USB
jack on your computer. The Car Camera's
display will show Mass Storage and PC
Camera.
2a. Select PC Camera to use this Car Camera
as a computer video camera.
2b. Select Mass Storage to access the files
on this unit's SD card. When used as Mass
Storage, it will appear on your hard drive
as an external drive. Open it, then open
the DCIM folder to access the recordings
separated into folders by date. Move or delete files the same way you would with
other files.
3. Safely eject from your computer as with other drives.
Note: When connected to a computer, the battery will charge and the LED will light
yellow.
22

CONNECTING TO A TV

1. Connect an HDMI cable (not included) to the HDMI jack on this Car Camera and the
other end to a TV or other video device that supports HDMI input.
Operate the Car Camera as described previously and now you can use the external
TV/video device as the display to view while recording, or view recorded videos/
photos.
2 3
23