Table of Contents
Advertisement
INSTALLATION
1. Insert the holder into the suction
base by aligning the hooks with the
corresponding inserts and firmly slide
the mount down, until you hear a
clicking sound. This can be done in either
direction.
2 a. Thoroughly clean the windshield before
installation.
b. Rotate the sunction control counter
clockwise (released position) before
mounting.
c. Place the sunction cup firmly on the
windshield and rotate the suction
control clockwise to get a secure fit.
Note: Where the camera is placed on the
windshield is a matter of preference.
10
INSTALLATION
3.
Open out the Supports and then press
the Release button to open the
Holders.
4. a. Insert the Car Camera as shown for best
results.
b. Press in on the Holders for a secure fit.
c. Rotate the lens up to 180° as desired.
Note: You can insert the Car Camera into the
Holder in either direction; experiment for best
results.
1 1
11
Advertisement
Table of Contents
