Advertisement
2
DELL S2719DM
Tear off 2pcs double-faced tapes on the left and right
side of the middle bezel, then tear off 2pcs aluminum
S6
foil to release the panel lamp cable and LVDS
connector.
Use a Philips-head screwdriver to remove 2pcs
screws for unlocking the front bezel with the panel
module, and then use a proper tool to disconnect the
S7
panel lamp cable, LVDS cable and function key
board from the connector of the main board.
(No.1~2 screw size=M1.6x2.2, Torque=0.5±0.1kgfxcm)
1
S8
S9
2
S10
Use a Philips-head screwdriver to remove 3pcs
screws for unlocking bracket with panel module.
(No.1~3 screw size=M3x2.8, Torque=3
2
1
Use a Philips-head screwdriver to remove 4pcs
screws for unlocking bracket, move away the bracket
and then remove 1pcs screw for unlocking the front
bezel from the panel module, and then remove the
front bezel carefully.
(No.1~5 screw size=M3x4, Torque=3
2
5
1
Put the front bezel with function key board into a
fixture, tear off the mylar, then use a Philips-head
screwdriver to remove 3pcs screws for unlocking the
function key board with front bezel.
(No.1~3 screw size=M0.2x2.4, Torque=1
3
1
2
kgfxcm)
±0.5
3
kgfxcm)
±0.5
3
4
kgfxcm)
±0.2
Advertisement
