Innova GetGo SF02M3W:4+7 Owner's Manual page 8

Step 4:
Insert 3 AAA batteries into the Wireless Remote.
Step 5:
Plug the Power Cord into a grounded electrical outlet. A surge protector is
recommended.
Using the Wireless Remote Control, push the HEAD UP button and then push the
HEAD DOWN button to test the bed. If the motors are working, skip to step 7.
NOTE: The actuator is a gravity down motor, which needs weight to be lowered.
Step 6:
Synchronize the Wireless Remote with the Control Box:
After plugging in the base to a grounded outlet, the base will return to flat position
and you will hear a beep. At this time, it enters the pairing state for ten seconds.
(If you have not completed pairing within ten seconds, press the orange SYNC
button for 2-3 seconds.)
Press HEAD UP and HEAD DOWN buttons simultaneously for 3-5 seconds. (See
Figure 2) You will hear a beep when syncing is successful.
The adjustable bed should work after syncing the Wireless Remote with the
Control Box. Press the HEAD UP button and then FOOT UP buttons to test.
The pairing is complete. If you need to pair again, press the SYNC button on the
power cord for 2-3 seconds until you hear a beep.
WE STRONGLY RECOMMEND:
In order to help protect your investment in case of a power surge or outage, use
an electrical surge protection device with a battery backup system (not included)
and plug it in to a grounded outlet.
8