Advertisement
4
Installing the Bagger Top
Parts needed for this procedure:
1
Circular cotter pin
Procedure
1. Install the bagger top to the bagger frame. Slide
the brackets over the posts in the bagger frame and
install the circular cotter into the hole in the right
hand post (Figure 11). Rotate the bagger top down
to the operating position. The bagger top is easier to
install if two people work together.
Note: To remove the circular cotter, continue to
rotate it in the same direction as installed.
Figure 11
1. Bagger top
2. Bagger frame
3. Bracket, bagger top
G016265
4. Circular cotter pin
5. Post
2. Lift the bagger top and install the bags by sliding
the bag frame hooks onto the retaining brackets
(Figure 12).
4
3
G005672
1. Bag
2. Bagger frame
3. Lower the bagger top onto the bag (Figure 13).
6
1
2
Figure 12
3. Retaining bracket
4. Bag frame hook
G005757
Figure 13
Advertisement
