The user should also record all settings changed for use in programming a new controller in case a replacement is ever needed. Always thoroughly test controller operation in the installed configuration to verify user settings. SJE Rhombus ® Type IFS Operation Manual...
Control/Alarm power input • 0-250 Vac, 50/60Hz, 20A max. Pump Power input • 5kA short circuit current rating • 24 Vdc, class 2 control power • Auxiliary Power -- 24 Vdc, 100mA max. SJE Rhombus Type IFS Operation Manual ®...
Pump Hour Meter (selectable) Pump Cycle Counts (selectable) Level Bar Graph or Float Status Tank Level (C-Level™) Pump Amps (selectable - not shown) USER INTERFACE Color Liquid Crystal Display (LCD) Menu Navigation And ENTER Dial SJE Rhombus Type IFS Operation Manual ®...
Page 6
- Configures timers for timed dose operation Level Settings - Configures level setpoints Alternation (duplex only) - Configures alternation mode for duplex panels Advanced - Configures advanced functions and accesses troubleshooting tools Back - Exits the Main Menu SJE Rhombus ® Type IFS Operation Manual...
Level Settings (C-Level™ Mode Only) Timed Dose Mode Simplex Demand Dose Mode Duplex Demand Dose Mode Start = save and exit = exit without saving *the order of the alarm setting changes based on the value entered SJE Rhombus ® Type IFS Operation Manual...
Page 8
Timer Type (when Timed Dose is selected, duplex panels only) Single Timer Independent Timers* Back *Allows for two independent timed dose systems on a duplex panel Expansion Port Enable Disable Back Seal Fail/Thermal (when Expansion Port is enabled) Enable Disable Back SJE Rhombus ® Type IFS Operation Manual...
Page 9
Flash Alarm 2 Only Back Manual Reset Enable Disable Back Redundant High Water Lag Enable Disable Back Back Seal Fail Alarm Enable Enable Disable Back Thermal Alarm Enable Disable Back Overload Alarm Enable Disable Back SJE Rhombus ® Type IFS Operation Manual...
Page 10
11.80 V DC Bus 3 3.29 V Back *Visible only for C -Level™ mode **Float Status for duplex demand dose configuration. Float labels change based on controller configuration. ***Visible only for duplex configuration SJE Rhombus ® Type IFS Operation Manual...
Page 11
V 0.00 Settings Language Color Theme Password Setup Back Language English Espanol Francais Back Color Theme Dark Light Back Password Setup 00 - 00 Enable = save and exit = exit without saving SJE Rhombus ® Type IFS Operation Manual...
HAND mode. Upon releasing the enter button, in this case, the controller will automatically be changed to AUTO mode and will return to the main screen. SJE Rhombus ® Type IFS Operation Manual...
• Navigate to “Yes” when asked to reset the value. • Navigate to “Confirm” to clear the count or ETM, or to “Cancel” to exit without clearing the count or ETM. Pump 1 ETM Are You Sure? Cancel Confirm SJE Rhombus ® Type IFS Operation Manual...
Float Fail switch closure that is outside of the • Ensure the float switches do not normal sequence of operation. contact the sides of the tank, or objects in the tank. SJE Rhombus ® Type IFS Operation Manual...
Page 15
Demand 3-Float mode. The controller is configured for manual • Press the Test/Silence button to reset Press Test/Silence to Reset Alarm alarm reset and the formerly active the alarm status. alarm is now inactive. SJE Rhombus Type IFS Operation Manual ®...
This screen displays the status of each pump connected to the controller. *The example shows a controller configured as Duplex. Alert Status Horn Beacon Alarm Aux This screen displays the status of the controller alarm. SJE Rhombus Type IFS Operation Manual ®...
Page 17
Duplex with a thermal/seal fail module. Controller Status DC Bus 1 22.41 V DC Bus 2 11.79 V DC Bus 3 3.29 V This section displays the status of the voltage buses on the controller. SJE Rhombus Type IFS Operation Manual ®...
OVERLOAD 1 INPUT ALARM LIGHT (0V) OVERLOAD 2 INPUT ALARM LIGHT (24V) DIGITAL INPUT COMMON ALARM HORN (0V) DIGITAL INPUT COMMON ALARM HORN (24V) DIGITAL INPUT COMMON AUX 24VDC SUPPLY (-) AUX 24VDC SUPPLY (+) SJE Rhombus ® Type IFS Operation Manual...
Need help?
Do you have a question about the IFS and is the answer not in the manual?
Questions and answers