Important Safety Instructions - Honeywell HTF337 Series Owner's Manual

IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE SAFETY INSTRUCTIONS BEFORE
USING THIS FAN
When using electrical appliances, basic precautions should always be followed to reduce the risk
of fire, electric shock, and injury to persons, including the following:
FOR US MODELS ONLY - This product employs overload protection (fuse). A blown fuse indicates an
overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Replace the fuse as
per the user servicing instructions (follow product marking for proper fuse rating) and recheck the product. If
the replacement fuse blows, a short-circuit may be present and the product should be discarded or returned
to an authorized service facility for examination and/or repair.
1. Use this fan only as described in this
manual. Other use is not recommended as
it may cause fire, electric shock, or injury to
persons.
2. This product is intended for household use
ONLY and not for commercial, industrial or
outdoor use.
3. To protect against electric shock, DO NOT
place fan in window, DO NOT immerse unit,
plug, or cord in water, and DO NOT spray
unit with liquids.
4. This appliance has a polarized plug (one
blade is wider than the other). To reduce the
risk of electric shock, this plug is intended to
fit only one way in a polarized outlet. If the
plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a
qualified electrician. DO NOT attempt to
defeat this safety feature.
5. Close supervision is necessary when any
appliance is used by or near children.
6. Turn the fan to the OFF position and unplug
the fan from the outlet when not in use,
when moving the fan from one location to
another, and before cleaning.
7. To disconnect the fan, first turn the unit
OFF, grip the plug and pull it from the wall
outlet. NEVER pull the plug by the cord.
8. DO NOT operate the fan in the presence of
explosive and/or flammable fumes.
For FCC compliance information, please see page 6 of this manual.
WARNING:
To Reduce The Risk of Fire or Electric Shock, DO NOT Use This Fan With Any
Solid-State Speed Control Device.
9. DO NOT place the fan or any parts near
an open flame, cooking, or other heating
appliance.
10. DO NOT use any product with a damaged
cord or plug, any product that malfunctions,
or any product that has been dropped or
damaged in any manner (see warranty).
11. Avoid contact with moving fan parts.
12. The use of attachments not recommended
by the manufacturer may be hazardous.
13. Place the fan on a dry, level surface.
14. DO NOT hang or mount fan on a wall or
ceiling.
15. DO NOT operate if the fan housing is
removed or damaged.
16. A loose fit between the AC outlet (receptacle)
and plug may cause overheating and a
distortion of the plug. Contact a qualified
electrician to replace loose or worn outlet.
17. DO NOT cover cord with throw rugs, runners,
or similar coverings. DO NOT route cord
under furniture or appliances. Arrange cord
away from traffic areas and where it will
not be a tripping hazard. DO NOT use an
extension cord or power strip with this fan.
SAVE THESE INSTRUCTIONS.
2