Advertisement
Fasten the nine screws on the system board to secure the system board to the chassis.
2.
Figure 58 Installing the system board
Power Supply Unit (PSU)
Located on the rear panel of the server power supply is a standard autoranging 750-watt PSU with
PFC (power factor correction) function.
Figure 59 Power supply unit
WARNING: Take note of the following reminders to reduce the risk of personal injury from electric
shock hazards and/or damage to the equipment.
•
Installation of power supply units should be referred to individuals who are qualified to service server
systems and are trained to deal with equipment capable of generating hazardous energy levels.
•
DO NOT open the power supply unit. There are no serviceable parts inside it.
To remove the power supply:
Disconnect the power cable connecting the power supply and the motherboard.
1.
All manuals and user guides at all-guides.com
Contents 65
Advertisement
