HP ProLiant DL185 Generation 5 Maintenance And Service Manual page 31

Once the cover is attached to the chassis, tighten the captive screw on the rear panel with a T-15
2.
screwdriver.
Figure 2 Reinstalling the Top Cover
Top Middle Cover
To remove the top middle cover:
Remove the top cover.
1.
Remove the screws (one on each side of the chassis and those on the top middle cover) that
2.
secure the top middle cover to the chassis.
Lift the top middle cover away from the chassis.
3.
Figure 3 Removing the Top Middle Cover
To reinstall the top middle cover:
Fasten the screws (one on each side of the chassis and those on the top middle cover) to secure
1.
the top middle cover to the chassis.
All manuals and user guides at all-guides.com
Contents 31