HP ProLiant DL185 Generation 5 Maintenance And Service Manual page 45

Figure 24 Removing the backplane
To install the backplane:
Orient the backplane so that the three notches on the board align with the three hooks on the
1.
drive cage and press the board down until it clicks into place.
Secure the backplane with screws.
2.
Figure 25 Installing the backplane
Install all cables including optical drive cables.
3.
The Rear DVD/CDRW Optical Drive PCI cage
To remove the Rear DVD/CDRW Optical Drive PCI cage
Remove the screw that secures the optical drive carrier to the rear DVD/CDRW optical drive PCI
1.
cage using a T-10 driver. (step 1 in figure 26)
Pull the optical drive carrier out of the cage. (step 2 in figure 26)
2.
All manuals and user guides at all-guides.com
：
Contents 45