Engine V85 E4
•
Remove the valve from the head
•
Remove the gasket of the valve guide
VALVE GUIDES MUST BE REPLACED WHEN THEY ARE
WORN TO THE POINT THAT REPLACING THE VALVE
ALONE IS NOT ENOUGH TO ELIMINATE CLEARANCE BE-
TWEEN VALVE STEM AND VALVE GUIDE BORE.
•
Remove the lower cap of the spring
Checking the rocker arms
•
Check that the bolt surface that con-
tacts the rockers is not exceedingly
worn.
•
Check the rocker to valve and rocker to
rod contact surfaces.
Valve check
If the below shown values are out of the limits of the component wear, replace it
Engine
ENG - 69