Engine
Specification
Class 1
Class 2
Class 3
Class 4
Four different crankcase classes are available:
•
(1-2) according to diameter of hole in half crankcase shells on alternator side.
•
(3-4) according to diameter of hole in half crankcase shells on clutch side.
CRANKSHAFT
Based on the development and improvement process, the crankshaft categories can be stamped on
the crankshaft counterweights (figure A)
ENG - 60
C
RANKCASE HOLE DIAMETER
Bushing seat diameter: 43.657-43.663 mm (1.7188-1.7190 in)
Bushing seat diameter: 43.664-43.670 mm (1.7191-1.7193 in)
Bushing seat diameter: 47.130-47.136 mm (1.8555-1.8557 in)
Bushing seat diameter: 47.137-47.142 mm (1.8558-1.8560 in)
Engine V85 E4
Desc./Quantity