Engine
•
Remove the external body (1), the
thrust bearing (2) and two related slid-
ing washers (3) and the external body
(4).
•
Remove the pusher plate
•
Remove the gearbox cover with a few
mallet strokes
CAUTION
CAREFULLY CLEAN THE THREEBOND FROM THE CONTACT SURFACES BEFORE APPLYING
A NEW LAYER OF THREEBOND 1207B DURING THE REASSEMBLY OF THE GEARBOX.
•
Having removed all internal components, to remove the bearings fitted in the gearbox crank-
cases, the safety washers/plate must be removed first.
ENG - 28
Engine V85 E4