Table of Contents
Advertisement
Wall-mounting the Watering
Controller :
6
6
6
7
5. Operation
Setting the date and time :
1.
2.
3.
4.
5.
6.
The two screws (not supplied) for attaching the Watering
Controller have to be screwed into place 80 mm apart and the
screw head diameter must not exceed 8 mm.
6
1. Screw the screws
2. Attach the Watering Controller.
1
3. Release snap lock
your Watering Controller " ) and mark hole for screw
7
elongated hole
.
6
4. Screw the screw
2
5. Close cover
and let snap lock
5.1 Basic Programming
Date and Time (Time Key)
You can end the programming mode at any time by pressing the
Time key.
You must set the date and time before you can set the watering
programs. The day of the week is selected automatically using
the date. When the Time key is pressed, all the valves are clo-
sed as a precaution.
1. Plug in the power supply unit – or – press the Time key.
YEAR
and date-year flash in the display.
2. Select the date-year using the ▲-▼ keys (e.g.
confirm by pressing the OK key.
MONTH
and date-month flash.
3. Select the date-month using the ▲-▼ keys (e.g.
confirm by pressing the OK key.
Day
and date-day flash.
4. Select the date-day using the ▲-▼ keys (e.g.
confirm by pressing the OK key.
TIME
and time-hours flash.
5. Select the time-hours using the ▲-▼ keys (e.g.
confirm by pressing the OK key.
TIME
and time-minutes flash.
6. Select the time-minutes using the ▲-▼ keys (e.g.
and confirm by pressing the OK key.
The date and time have been set and the main level is displayed.
into the wall 80 mm apart.
2
(see "Connecting
and open cover
into the elongated hole
1
engage.
6
of the
7
for fixation.
2010
) and
05
) and
23
) and
12
hours) and
30
minutes)
19
Advertisement
Table of Contents
