Gardena 4030 Operating Instructions Manual page 10

Watering controller
Hide thumbs Also See for 4030:
Table of Contents

Advertisement

Ending active watering
prematurely :
1.
2.
Water all channels
manually :
1.
3.
% run-time-function :
1.
2.
You can exit active watering (programmed or started manually)
prematurely without changing the programs.
1. Press the Man. key.
SELECT CHANNEL
and the channel flash.
2. Select the active channel desired (in the frame e.g. channel 4)
using the ▲-▼ keys and confirm by pressing the OK key.
Watering is ended and the main level is displayed.
If all the channels are to be enabled manually, the channels are
opened manually one after the other with the manual watering
duration.
1. Press and hold down the OK key.
2. Also press and hold down the Man. key for 3 seconds.
MANUAL ALL
Run Time Man.,
3. Select the manual watering duration (
using the ▲-▼ keys (e.g.
OK key.
Manual watering starts with channel 1,
frame around the active channel flashes.
If the watering duration is not confirmed within 10 seconds by
pressing the OK key, the watering begins with the watering
duration displayed.
You can exit watering all the channels prematurely by pressing
the OK key + Man. key for 3 seconds.
Percentage Watering Duration
(% Run-Time Key)
You can end the programming mode at any time by pressing the
Run-Time key.
The programmed watering durations of all the watering programs
can be changed centrally in 10 % increments from 10 % to 200 %,
without having to change the individual programs (e.g. if you wish
to water your garden less in the autumn than in the summer).
ATTENTION ! If the run-time % figures are above 100 %,
programs may overlap as a result (see "Setting the watering
programs" ).
1. Press the % Run-Time key.
Run TimE %
and the percentage watering duration flash.
2. Select the figure for the percentage watering duration using
the ▲-▼ keys (e.g.
the OK key.
The percentage watering duration has been transferred and
the main level is displayed.
and minutes flash in the display.
00:30
00 :15
) and confirm by pressing the
MANUAL ALL
Run Time 60 %
) and confirm by pressing
minutes are preset)
and the
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

603012831284

Table of Contents