Initial Operation - Gardena Select Operator's Manual

A video of the
commissioning
and setting
processes is
available here:

2. INITIAL OPERATION

3. FUNCTION
v (Fig. F)
You can change the settings or move to the next
setting by turning the knob. You can confirm the
respective input by pressing the rotary knob.
Pressing the knob for a minimum of 3 seconds
locks or unlocks the display.
Time Active Watering
Connecting
sensor
Sensor
SET
Programs
P1
Start Time
(0 – 23) hrs (0 – 59) min.
Run Time
hrs
0 hrs 1 min. –
Mo Tu We Th Fr Sa Su
3 hrs 0 min.
ON
Frequency
(weekdays)
6
v (Fig. A – D)
Battery
Condition *
Sensor
Sensitivity
The number of
P2 P3
drops represents
the measured
soil moisture.
min
Watering
day
OFF
Timeplan
active /
deactive
*
max. 1 year
min. 4 weeks
4. PROGRAMMING
Fig. G:
1 Set time (hours) | 2 Set time (mins) |
3 day setting (Mon ‒ Sun) | 4 Ready for schedule
Fig. H:
1 Select schedule | 2 Set schedule |
3 Confirm schedule | 4 Device programmed
Fig. I:
Set = Sensor connected
Fig. J:
1 Active watering | 2 Change watering duration |
3 Stop active watering at any time
P1, P2, P3 denote watering schedules. You can
save up to 3 independent schedules. Schedules
can be activated or deactivated by pressing on / off
(see fig. H). During selection, selected watering
days are displayed as underlined weekdays.
In the standard display, only the selected days will
subsequently be shown. The current weekday
will be underlined.
By pressing the
be started or stopped at a desired time (see fig. J ).
Connect soil moisture sensor (optional) fig. D:
After a sensor is connected, the "set sensor" dis-
play will appear – this can last for up to 1 minute.
By selecting 3-drip / 0-drip the sensor response will
be activated / deactivated. After successful activa-
max. 4 weeks
too weak for opening again
v (Fig. G – J)
button, manual watering can